MbCurve Member List

This is the complete list of members for MbCurve, including all inherited members.

_FirstDer(double t, MbVector &v) const	MbCurve	virtual
_Normal(double t, MbVector &v) const	MbCurve	inline
_Normal(double t, MbDirection &d) const	MbCurve	inline
_PointOn(double t, MbCartPoint &p) const	MbCurve	virtual
_SecondDer(double t, MbVector &v) const	MbCurve	virtual
_Tangent(double t, MbVector &v) const	MbCurve	inline
_Tangent(double t, MbDirection &d) const	MbCurve	inline
_ThirdDer(double t, MbVector &v) const	MbCurve	virtual
AddRef() const	MbRefItem
AddYourGabaritMtr(MbRect &rect, const MbMatrix &matr) const	MbCurve	virtual
AddYourGabaritTo(MbRect &r) const =0	MbPlaneItem	pure virtual
AreLimitPointsEqual() const	MbCurve	inline
BasePointProjection(const MbCartPoint &pnt, MbCartPoint &on) const	MbCurve
BeginApprox(double sag, double &tbeg, double &tend, MbCartPoint &pnt, bool &existNextPoint) const	MbCurve	virtual
BreakPoints(std::vector< double > &vBreaks, double precision=ANGLE_REGION) const	MbCurve	virtual
CalculateGabarit(MbRect &) const	MbCurve	virtual
CalculateLength(double t1, double t2) const	MbCurve	virtual
CalculateLocalGabarit(const MbMatrix &into, MbRect &local) const	MbCurve	virtual
CalculateMetricLength() const	MbCurve	virtual
CalculatePolygon(double sag, MbPolygon &poligon) const	MbCurve	virtual
CorrectCyclicParameter(double &t, double eps=Math::paramRegion) const	MbCurve
CorrectParameter(double &t) const	MbCurve
CreateProperty(MbePrompt name) const override	MbCurve	virtual
Curvature(double t) const	MbCurve	virtual
CurvatureDerive(double t) const	MbCurve
CurvatureRadius(double t) const	MbCurve
CurveToSubstrate(double &) const	MbCurve	virtual
DecRef() const	MbRefItem
Deformation(const MbRect &rect, const MbMatrix &matr)	MbCurve	virtual
DeletePart(double t1, double t2, MbCurve *&part2)=0	MbCurve	pure virtual
DerLength(double &t) const	MbCurve	inline
DeviationStep(double t, double ang) const	MbCurve	virtual
DirectPointProjection(const MbCartPoint &pnt, const MbDirection &dir, MbCartPoint &pp) const	MbCurve
DistanceAlong(double &t, double len, int curveDir, double eps=Math::LengthEps, VERSION version=Math::DefaultMathVersion()) const	MbCurve	virtual
DistanceToPoint(const MbCartPoint &toP) const override	MbCurve	virtual
DistanceToPointIfLess(const MbCartPoint &toP, double &d) const override	MbCurve	virtual
Duplicate(MbRegDuplicate *iReg=nullptr) const =0	MbPlaneItem	pure virtual
Explore(double &t, bool ext, MbCartPoint &pnt, MbVector &fir, MbVector *sec, MbVector *thir) const	MbCurve	virtual
Extend(const MbCurveExtensionParameters &parameters, c3d::PlaneCurveSPtr &resCurve) const	MbCurve	virtual
Family() const override	MbCurve	virtual
FirstDer(double &t, MbVector &v) const =0	MbCurve	pure virtual
FirstDer(double &t) const	MbCurve	inline
GetAnalyticalFunctionsBounds(std::vector< double > &params) const	MbCurve	virtual
GetAxisPoint(MbCartPoint &p) const	MbCurve	virtual
GetBasisCurve() const	MbCurve	virtual
GetBasisPoints(MbControlData &) const =0	MbPlaneItem	pure virtual
GetCentre(MbCartPoint &) const	MbCurve	virtual
GetCount() const	MbCurve	virtual
GetCurveName() const	MbCurve	inline
GetEndPoint(MbCartPoint &) const	MbCurve	virtual
GetLengthEvaluation() const	MbCurve	virtual
GetLimitPoint(ptrdiff_t number) const	MbCurve	inline
GetLimitPoint(ptrdiff_t number, MbCartPoint &pnt) const	MbCurve	inline
GetLimitPointAndTangent(ptrdiff_t number, MbCartPoint &pnt, MbVector &v) const	MbCurve	inline
GetLimitTangent(ptrdiff_t number, MbVector &v) const	MbCurve	inline
GetLock() const	MbNestSyncItem
GetMetricLength() const =0	MbCurve	pure virtual
GetMiddlePoint(MbCartPoint &) const	MbCurve	virtual
GetNextPoint(double sag, double tend, double &tcur, MbCartPoint &pnt) const	MbCurve	virtual
GetParamDelta() const	MbCurve	virtual
GetParamLength() const	MbCurve	inline
GetParamToUnit() const	MbCurve	virtual
GetParamToUnit(double t) const	MbCurve	virtual
GetPeriod() const	MbCurve	virtual
GetPointsByEvenLengthDelta(size_t n, std::vector< MbCartPoint > &pnts) const	MbCurve	virtual
GetPointsByEvenParamDelta(size_t n, std::vector< MbCartPoint > &pnts) const	MbCurve
GetProperties(MbProperties &properties)=0	MbPlaneItem	pure virtual
GetPureName(const VersionContainer &) const	TapeBase	virtual
GetRadius(double accuracy=PARAM_REGION) const	MbCurve	virtual
GetRegistrable() const	TapeBase
GetSpecificPoint(const MbCartPoint &from, double &dmax, MbCartPoint &pnt) const	MbCurve	virtual
GetStartPoint(MbCartPoint &) const	MbCurve	virtual
GetSubstrate() const	MbCurve	virtual
GetTEpsilon(double epsilon) const	MbCurve	virtual
GetTEpsilon(double t, double epsilon) const	MbCurve	virtual
GetTMax() const =0	MbCurve	pure virtual
GetTMid() const	MbCurve	inline
GetTMin() const =0	MbCurve	pure virtual
GetTRange() const	MbCurve	inline
GetTRegion(double epsilon) const	MbCurve	virtual
GetTRegion(double t, double epsilon) const	MbCurve	virtual
GetTRegion(double t, const MbDimAccuracy &xyEps) const	MbCurve	virtual
GetUseCount() const	MbRefItem
GetWeightCentre(MbCartPoint &) const	MbCurve	virtual
GoThroughPoint(MbCartPoint &pnt)	MbCurve	virtual
HasLength(double &length) const =0	MbCurve	pure virtual
HorzIsoclinal(SArray< double > &tFind) const	MbCurve
IntersectHorizontal(double y, SArray< double > &cross) const	MbCurve	virtual
IntersectVertical(double x, SArray< double > &cross) const	MbCurve	virtual
Inverse(MbRegTransform *iReg=nullptr)=0	MbCurve	pure virtual
InverseDuplicate() const	MbCurve
IsA() const =0	MbPlaneItem	pure virtual
IsBounded() const	MbCurve	virtual
IsClosed() const =0	MbCurve	pure virtual
IsCompleteInRect(const MbRect &rect) const	MbCurve	virtual
IsContinuousDerivative(bool &contLength, bool &contDirect, c3d::DoubleVector *params=nullptr, double epsilon=EPSILON) const	MbCurve	virtual
IsDegenerate(double eps=Math::LengthEps) const	MbCurve	virtual
IsFamilyRegistrable() const	TapeBase	virtual
IsInRectForDeform(const MbRect &) const	MbCurve	virtual
IsInverseSame(const MbCurve &curve, double accuracy=LENGTH_EPSILON) const	MbCurve
Isoclinal(const MbVector &angle, SArray< double > &tFind) const	MbCurve	virtual
IsParamOn(double t, double eps=Math::paramEpsilon) const	MbCurve	inline
IsPeriodic() const	MbCurve	virtual
IsPointOn(const MbCartPoint &, double eps=Math::LengthEps) const	MbCurve	inline
IsReparamSame(const MbCurve &curve, double &factor) const	MbCurve	virtual
IsSame(const MbPlaneItem &item, double accuracy=LENGTH_EPSILON) const =0	MbPlaneItem	pure virtual
IsSimilar(const MbPlaneItem &item) const	MbPlaneItem	virtual
IsSimilarToCurve(const MbCurve &curve, double precision=PARAM_PRECISION) const	MbCurve	virtual
IsSmoothConnected(double angleEps) const	MbCurve	virtual
IsSpaceNear(const MbCurve &curve, double eps, bool ext, double devSag=5.0 *Math::deviateSag) const	MbCurve
IsSpaceNear(const MbCurve &curve, double xEps, double yEps, bool ext, double xNear, double yNear, double devSag=5.0 *Math::deviateSag) const	MbCurve
IsStraight(bool ignoreParams=false) const	MbCurve	virtual
IsTouch(double eps=Math::LengthEps) const	MbCurve	inline
IsVisibleInRect(const MbRect &rect, bool exact=false) const override	MbCurve	virtual
LengthBetween2Points(MbCartPoint &p1, MbCartPoint &p2, MbCartPoint *pc=nullptr) const	MbCurve	virtual
Lock() const	MbNestSyncItem
LowestPoint(MbCartPoint &lowestPoint, double &tLowest) const	MbCurve
MbCurve()	MbCurve	protected
MbCurve(const MbCurve &other)	MbCurve	inlineprotected
MbPlaneItem()	MbPlaneItem	protected
MbRefItem()	MbRefItem	protected
Move(const MbVector &to, MbRegTransform *iReg=nullptr, const MbSurface *newSurface=nullptr)=0	MbPlaneItem	pure virtual
name	MbCurve	protected
NearPointProjection(const MbCartPoint &pnt, double xEpsilon, double yEpsilon, double &t, bool ext, MbRect1D *tRange=nullptr) const	MbCurve	virtual
Normal(double &t, MbVector &v) const	MbCurve	inline
Normal(double &t, MbDirection &d) const	MbCurve	inline
Normal(double &t) const	MbCurve	inline
NurbsContour() const	MbCurve	virtual
NurbsCurve(const MbCurveIntoNurbsInfo *nInfo=nullptr) const	MbCurve
NurbsCurve(const MbCurveIntoNurbsInfo &nInfo) const =0	MbCurve	pure virtual
NurbsCurve(const MbNurbsParameters &tParameters) const	MbCurve	virtual
Offset(double rad) const	MbCurve	virtual
OffsetCuspPoint(SArray< double > &tCusps, double dist) const	MbCurve	virtual
operator[](size_t) const	MbCurve	inline
PerpendicularPoint(const MbCartPoint &pnt, SArray< double > &tFind) const	MbCurve	virtual
PointLocation(const MbCartPoint &pnt, double eps=Math::LengthEps) const	MbCurve	virtual
PointOn(double &t, MbCartPoint &p) const =0	MbCurve	pure virtual
PointOn(double &t) const	MbCurve	inline
PointProjection(const MbCartPoint &pnt) const	MbCurve	virtual
PointProjection(const MbCartPoint &pnt, MbCartPoint &on) const	MbCurve	inline
PointProjectionAndAngle(MbCartPoint &on, double &angle) const	MbCurve	inline
PointProjectionNewton(const MbCartPoint &p, double xEpsilon, double yEpsilon, size_t iterLimit, double &t, bool ext) const	MbCurve
PointRelative(const MbCartPoint &pnt, double eps=Math::LengthEps) const	MbCurve	virtual
PrepareIntegralData(const bool forced) const	MbCurve	virtual
PrepareWrite() const	MbPlaneItem	inline
Refresh() override	MbCurve	virtual
RefType() const override	MbPlaneItem	virtual
Release() const	MbRefItem
ResetTCalc() const	MbCurve	virtual
Rotate(const MbCartPoint &pnt, const MbDirection &angle, MbRegTransform *iReg=nullptr, const MbSurface *newSurface=nullptr)=0	MbPlaneItem	pure virtual
Rotate(const MbCartPoint &pnt, double angle, MbRegTransform *iReg=nullptr, const MbSurface *newSurface=nullptr)	MbPlaneItem	virtual
SecondDer(double &t, MbVector &v) const =0	MbCurve	pure virtual
SelfIntersect(SArray< MbCrossPoint > &, double metricEps=Math::LengthEps) const	MbCurve	virtual
SetBasisCurve()	MbCurve	virtual
SetBasisPoints(const MbControlData &)=0	MbPlaneItem	pure virtual
SetContinuousDerivativeLength(VERSION version, double epsilon=EPSILON)	MbCurve	virtual
SetCurveName(SimpleName newName)	MbCurve	inline
SetEqual(const MbPlaneItem &item)=0	MbPlaneItem	pure virtual
SetProperties(const MbProperties &properties)=0	MbPlaneItem	pure virtual
SetRegistrable(RegistrableRec regs=registrable) const	TapeBase
SetSubstrate()	MbCurve	virtual
size() const	MbCurve	inline
SmallestPerpendicular(const MbCartPoint &pnt, double &tProj) const	MbCurve	virtual
Step(double t, double sag) const	MbCurve	virtual
SubstrateCurveDirection() const	MbCurve	virtual
SubstrateToCurve(double &) const	MbCurve	virtual
Tangent(double &t, MbVector &v) const	MbCurve	inline
Tangent(double &t, MbDirection &d) const	MbCurve	inline
Tangent(double &t) const	MbCurve	inline
TangentPoint(const MbCartPoint &pnt, SArray< double > &tFind) const	MbCurve	virtual
TapeBase(RegistrableRec regs=noRegistrable)	TapeBase
TapeBase(const TapeBase &)	TapeBase
ThirdDer(double &t, MbVector &v) const =0	MbCurve	pure virtual
Transform(const MbMatrix &matr, MbRegTransform *iReg=nullptr, const MbSurface *newSurface=nullptr)=0	MbPlaneItem	pure virtual
Trimmed(double t1, double t2, int sense, bool saveParamLenAndLaw=false) const	MbCurve	virtual
Trimmed(double t1, double t2, int sense, const MbDimAccuracy &xyEps, bool saveParamLenAndLaw) const =0	MbCurve	pure virtual
TrimmPart(double t1, double t2, MbCurve *&part2)=0	MbCurve	pure virtual
Type() const override	MbCurve	virtual
Unlock() const	MbNestSyncItem
VertIsoclinal(SArray< double > &tFind) const	MbCurve
~MbCurve()	MbCurve	virtual
~MbPlaneItem()	MbPlaneItem	virtual
~TapeBase()	TapeBase	virtual