C3D Toolkit  Kernel - 117982, Vision - 2.9.2.2

Angular dimension. More...

#include <mb_dimension.h>

+ Inheritance diagram for MbAngularDimension:
+ Collaboration diagram for MbAngularDimension:

Public Member Functions

 MbAngularDimension (const MbCartPoint3D &center, const MbCartPoint3D &base1, const MbCartPoint3D &base2)
 Constructor. More...
 
- Public Member Functions inherited from MbDimension
 MbDimension ()
 Constructor.
 
virtual ~MbDimension ()
 Destructor.
 
MbeSpaceType Type () const override
 Get the group object type.
 
bool IsSimilar (const MbSpaceItem &) const override
 Determine whether an object is similar. More...
 
- Public Member Functions inherited from MbLegend
virtual ~MbLegend ()
 Destructor.
 
MbeSpaceType Family () const override
 Get family of objects.
 
void CalculateLocalGabarit (const MbMatrix3D &into, MbCube &cube) const override
 To compute bounding box in a local coordinate system. More...
 
- Public Member Functions inherited from MbSpaceItem
virtual ~MbSpaceItem ()
 Destructor.
 
void PrepareWrite () const
 Register object. More...
 
MbeRefType RefType () const override
 Get a registration type (for copying, duplication).
 
bool IsFamilyRegistrable () const override
 Whether the object belongs to a registrable family.
 
virtual void Refresh ()
 Translate all the time (mutable) data objects in an inconsistent (initial) state.
 
void CalculateWire (const MbStepData &stepData, MbMesh &mesh) const
 
void CalculateWire (double sag, MbMesh &mesh) const
 
virtual void GetBasisItems (RPArray< MbSpaceItem > &)
 Outstanding reference objects in a container sent.
 
virtual void GetBasisPoints (MbControlData3D &) const
 Get control points of object.
 
virtual void SetBasisPoints (const MbControlData3D &)
 Change the object by control points.
 
- Public Member Functions inherited from TapeBase
 TapeBase (RegistrableRec regs=noRegistrable)
 Constructor.
 
 TapeBase (const TapeBase &)
 Copy-constructor.
 
virtual ~TapeBase ()
 Destructor.
 
RegistrableRec GetRegistrable () const
 Whether the stream class is registrable.
 
void SetRegistrable (RegistrableRec regs=registrable) const
 Set the state of registration of the stream class.
 
virtual const char * GetPureName (const VersionContainer &) const
 Get the class name.
 
- Public Member Functions inherited from MbRefItem
refcount_t GetUseCount () const
 Get count of references (get count of owners of an object).
 
refcount_t AddRef () const
 Increase count of references by one.
 
refcount_t DecRef () const
 Decrease count of references by one.
 
refcount_t Release () const
 Decrease count of references by one and if count of references became zero, then remove itself.
 

Protected Member Functions

 MbAngularDimension (const MbAngularDimension &)
 Copy-constructor.
 
- Protected Member Functions inherited from MbDimension
 MbDimension (const MbDimension &)
 Copy-constructor.
 
- Protected Member Functions inherited from MbLegend
 MbLegend ()
 Constructor.
 
- Protected Member Functions inherited from MbSpaceItem
 MbSpaceItem ()
 Default constructor.
 
- Protected Member Functions inherited from MbRefItem
 MbRefItem ()
 Constructor without parameters.
 

Common functions of a geometric object.

MbeSpaceType IsA () const override
 Get the type of the object.
 
MbSpaceItemDuplicate (MbRegDuplicate *=nullptr) const override
 Create a copy of the object. More...
 
bool IsSame (const MbSpaceItem &, double=LENGTH_EPSILON) const override
 Determine whether an object is equal. More...
 
bool SetEqual (const MbSpaceItem &) override
 Make objects equal if they are similar. More...
 
void Transform (const MbMatrix3D &, MbRegTransform *=nullptr) override
 Convert the object according to the matrix. More...
 
void Move (const MbVector3D &, MbRegTransform *=nullptr) override
 Move an object along a vector. More...
 
void Rotate (const MbAxis3D &, double angle, MbRegTransform *=nullptr) override
 Rotate an object around an axis at a given angle. More...
 
double DistanceToPoint (const MbCartPoint3D &) const override
 Determine the distance to the point. More...
 
void AddYourGabaritTo (MbCube &) const override
 Expand sent bounding box (a.k.a. gabarit), so that it included the object. More...
 
void CalculateMesh (const MbStepData &, const MbFormNote &, MbMesh &) const override
 Build polygonal copy mesh. More...
 
MbPropertyCreateProperty (MbePrompt) const override
 Create your own property with the name.
 
void GetProperties (MbProperties &) override
 Outstanding properties of the object. More...
 
void SetProperties (const MbProperties &) override
 Change the properties of an object. More...
 
void Init (const MbCartPoint3D &center, const MbCartPoint3D &base1, const MbCartPoint3D &base2)
 Initialize by two reference points and center point.
 
MbCartPoint3D GetBasePoint1 () const
 Get the first dimension snap point.
 
void SetBasePoint1 (const MbCartPoint3D &val)
 
MbCartPoint3D GetBasePoint2 () const
 Get the second dimension snap point.
 
void SetBasePoint2 (const MbCartPoint3D &val)
 
MbCartPoint3D GetCenterPoint () const
 Get center point.
 
void SetCenterPoint (const MbCartPoint3D &val)
 

Detailed Description

Angular dimension.

Constructor & Destructor Documentation

◆ MbAngularDimension()

MbAngularDimension::MbAngularDimension ( const MbCartPoint3D center,
const MbCartPoint3D base1,
const MbCartPoint3D base2 
)

Constructor.

Constructor.

Parameters
[in]base1- First dimension anchor point.
[in]center- Center point.
[in]base2- Second dimension anchor point.

Member Function Documentation

◆ Duplicate()

MbSpaceItem& MbAngularDimension::Duplicate ( MbRegDuplicate iReg = nullptr) const
overridevirtual

Create a copy of the object.

Create a copy of an object using the registrator. Registrator is used to prevent multiple copy of the object. If the object contains references to the other objects, then nested objects are copied as well. It is allowed not to pass registrator into the function. Then new copy of object will be created. While copying of single object or set of not connected objects, it is allowed not to use registrator. Registrator should be used if it is required to copy several connected objects. It is possible, that objects connection is based on the references to common objects. Then, while copying without using of registrator, it is possible to obtain set of copies, that contain references to the different copies of the same nested object, that leads to loss of connection between copies.

Parameters
[in]iReg- Registrator.
Returns
A copy of the object.

Implements MbSpaceItem.

◆ IsSame()

bool MbAngularDimension::IsSame ( const MbSpaceItem other,
double  accuracy = LENGTH_EPSILON 
) const
overridevirtual

Determine whether an object is equal.

Still considered objects of the same type, all data is the same (equal).

Parameters
[in]item- The object to compare.
[in]accuracy- The accuracy to compare.
Returns
Whether the objects are equal.

Implements MbSpaceItem.

◆ SetEqual()

bool MbAngularDimension::SetEqual ( const MbSpaceItem item)
overridevirtual

Make objects equal if they are similar.

You can still make only a similar objects.

Parameters
[in]item- The object to initialize.
Returns
Object is changed.

Implements MbSpaceItem.

◆ Transform()

void MbAngularDimension::Transform ( const MbMatrix3D matr,
MbRegTransform iReg = nullptr 
)
overridevirtual

Convert the object according to the matrix.

Convert the original object according to the matrix using the registrator. If object contains references to the other geometric objects, then nested objects are transformed according to the matrix. Registrator is needed to prevent multiple object copying. It is allowed to use function without registrator, if it is needed to transform single object. If it is needed to transform a set of connected objects, then one should use registrator to prevent repeating transformation of nested objects, because of the possible situation when several objects contain references to the same common objects, that require to be transformed.

Parameters
[in]matr- Transformation matrix.
[in]iReg- Registrator.

Implements MbSpaceItem.

◆ Move()

void MbAngularDimension::Move ( const MbVector3D to,
MbRegTransform iReg = nullptr 
)
overridevirtual

Move an object along a vector.

Move an object along a geometric vector using the registrator. If object contains references to the other geometric objects then the move operation is applied to the nested objects. Registrator is needed to prevent multiple copying of the object. It is allowed to use function without registrator, if it is needed to transform a single object. If it is needed to transform a set of connected objects, then one should use registrator to prevent repeating transformation of nested objects, because of the possible situation when several objects contain references to the same common objects, that require to be moved.

Parameters
[in]to- Shift vector.
[in]iReg- Registrator.

Implements MbSpaceItem.

◆ Rotate()

void MbAngularDimension::Rotate ( const MbAxis3D axis,
double  angle,
MbRegTransform iReg = nullptr 
)
overridevirtual

Rotate an object around an axis at a given angle.

Rotate an object around an axis at a given angle with the registrator. If object contains references to the other geometric objects then the rotation operation is applied to the nested objects. Registrator is needed to prevent multiple copying of the object. It is allowed to use function without registrator, if it is needed to transform a single object. If it is needed to transform a set of connected objects, then one should use registrator to prevent repeating transformation of nested objects, because of the possible situation when several objects contain references to the same common objects, that require to be rotated.

Parameters
[in]axis- The axis of rotation.
[in]angle- Rotation.
[in]iReg- Registrator.

Implements MbSpaceItem.

◆ DistanceToPoint()

double MbAngularDimension::DistanceToPoint ( const MbCartPoint3D point) const
overridevirtual

Determine the distance to the point.

Determine the distance to the point.

Parameters
[in]point- Point.
Returns
Distance to point

Implements MbSpaceItem.

◆ AddYourGabaritTo()

void MbAngularDimension::AddYourGabaritTo ( MbCube cube) const
overridevirtual

Expand sent bounding box (a.k.a. gabarit), so that it included the object.

Expand sent bounding box, so that it included the object.

Parameters
[in,out]cube- The bounding box to expand.

Implements MbSpaceItem.

◆ CalculateMesh()

void MbAngularDimension::CalculateMesh ( const MbStepData stepData,
const MbFormNote note,
MbMesh mesh 
) const
overridevirtual

Build polygonal copy mesh.

Build a polygonal copy of the object that is represented by polygons or/and fasets.

Parameters
[in]stepData- Data for еру step calculation for polygonal object.
[in]note- Way for polygonal object constructing.
[in,out]mesh- The builded polygonal object.

Implements MbSpaceItem.

◆ GetProperties()

void MbAngularDimension::GetProperties ( MbProperties properties)
overridevirtual

Outstanding properties of the object.

Issue internal data (properties) of the object for viewing and modification.

Parameters
[in]properties- Container for the internal data of the object.

Implements MbSpaceItem.

◆ SetProperties()

void MbAngularDimension::SetProperties ( const MbProperties properties)
overridevirtual

Change the properties of an object.

Changing the internal data (properties) of the object you are copying the corresponding values from the sent object.

Parameters
[in]properties- Container for the internal data of the object.

Implements MbSpaceItem.


The documentation for this class was generated from the following file: