Constructor of a shell from sheet material with a bead. More...

#include <cr_stamp_bead_solid.h>

Inheritance diagram for MbBeadSolid:

Collaboration diagram for MbBeadSolid:

Public Member Functions
MbeCreatorType	IsA () const override
	Get the object type.

MbCreator &	Duplicate (MbRegDuplicate *=nullptr) const override
	Create a copy of the object. More...

bool	IsSame (const MbCreator &other, double accuracy) const override
	Determine whether an object is equal? More...

bool	IsSimilar (const MbCreator &item) const override
	Determine whether an object is similar? More...

bool	SetEqual (const MbCreator &) override
	Make the objects equal if they are similar.

void	Transform (const MbMatrix3D &, MbRegTransform *=nullptr) override
	Transform according to the matrix. More...

void	Move (const MbVector3D &, MbRegTransform *=nullptr) override
	Translate along a vector. More...

void	Rotate (const MbAxis3D &, double angle, MbRegTransform *=nullptr) override
	Rotate an object about the axis. More...

MbePrompt	GetPropertyName () override
	Get a name of object property.

void	GetProperties (MbProperties &properties) override
	Get properties of the object.

void	SetProperties (const MbProperties &properties) override
	Set properties of the object.

void	GetBasisItems (RPArray< MbSpaceItem > &) override
	Get the basis objects.

void	GetBasisPoints (MbControlData3D &) const override
	Get control points of object.

void	SetBasisPoints (const MbControlData3D &) override
	Change the object by control points.

bool	CreateShell (MbFaceShell &shell, MbeCopyMode sameShell, RPArray< MbSpaceItem > items=nullptr) override
	Create a shell from the initial data. More...

Public Member Functions inherited from MbCreator
virtual	~MbCreator ()
	Destructor.

MbeRefType	RefType () const override
	Get the registration type (for copying, duplication).

virtual MbeCreatorType	Type () const
	Get the group type of the object.

bool	CreateShell (c3d::ShellSPtr &shell, MbeCopyMode sameShell, RPArray< MbSpaceItem > *items=nullptr)
	Create a shell from the initial data. More...

virtual bool	CreateWireFrame (MbWireFrame &frame, MbeCopyMode sameShell, RPArray< MbSpaceItem > items=nullptr)
	Create a wire-frame from the source data. More...

bool	CreateWireFrame (SPtr< MbWireFrame > &frame, MbeCopyMode sameShell)
	Create a wire-frame from the source data. More...

virtual bool	CreatePointFrame (MbPointFrame &frame, MbeCopyMode sameShell, RPArray< MbSpaceItem > items=nullptr)
	Create a point-frame from the source data. More...

bool	CreatePointFrame (SPtr< MbPointFrame > &frame, MbeCopyMode sameShell)
	Create a point-frame from the source data. More...

virtual bool	CreateMesh (MbMesh &mesh, MbeCopyMode sameShell, RPArray< MbSpaceItem > items=nullptr)
	Create a polygonal object from the source data. More...

bool	CreateMesh (SPtr< MbMesh > &mesh, MbeCopyMode sameShell)
	Create a polygonal object from the source data. More...

virtual void	Refresh (MbFaceShell &)
	Update the shell shape.

virtual void	Refresh (MbWireFrame &)
	Update the frame shape.

virtual size_t	GetCreatorsCount (MbeCreatorType ct) const
	Count internal creators by type.

virtual bool	GetInternalCreators (MbeCreatorType, c3d::ConstCreatorsSPtrVector &) const
	Get internal creators by type.

virtual bool	SetInternalCreators (MbeCreatorType, c3d::CreatorsSPtrVector &)
	Get internal creators by type.

virtual bool	Perform (MbCreator *) const
	Displace/Change the creator.

virtual void	SetYourVersion (VERSION version, bool forAll)
	Set the objects version.

VERSION	GetYourVersion () const
	Get the object version.

const MbSNameMaker &	GetYourNameMaker () const
	Get the name-maker.

MbSNameMaker &	SetYourNameMaker ()
	Get the object's name-maker for editing.

void	SetNameMaker (const MbSNameMaker &n)
	Set the object's name-maker.

SimpleName	GetMainName () const
	Get the main name of the object.

void	SetMainName (SimpleName n)
	Set the main name of the object.

MbeProcessState	GetStatus () const
	Get the flag of state.

void	SetStatus (MbeProcessState l)
	Set the flag of state.

void	PrepareWrite () const
	Register the object. More...

Public Member Functions inherited from MbRefItem
refcount_t	GetUseCount () const
	Get count of references (get count of owners of an object).

refcount_t	AddRef () const
	Increase count of references by one.

refcount_t	DecRef () const
	Decrease count of references by one.

refcount_t	Release () const
	Decrease count of references by one and if count of references became zero, then remove itself.

Public Member Functions inherited from TapeBase
	TapeBase (RegistrableRec regs=noRegistrable)
	Constructor.

	TapeBase (const TapeBase &)
	Copy-constructor.

virtual	~TapeBase ()
	Destructor.

RegistrableRec	GetRegistrable () const
	Whether the stream class is registrable.

void	SetRegistrable (RegistrableRec regs=registrable) const
	Set the state of registration of the stream class.

virtual const char *	GetPureName (const VersionContainer &) const
	Get the class name.

virtual bool	IsFamilyRegistrable () const
	Whether the object belongs to a registrable family.

Additional Inherited Members
Protected Member Functions inherited from MbCreator
	MbCreator (MbSNameMaker *)
	Constructor by name-maker.

	MbCreator (const MbSNameMaker &)
	Constructor by name-maker.

	MbCreator (const MbCreator &)
	Copy-constructor.

Protected Member Functions inherited from MbRefItem
	MbRefItem ()
	Constructor without parameters.

Protected Attributes inherited from MbCreator
SPtr< MbSNameMaker >	names
	An object defining the names of elements and objects created by the constructor.

MbeProcessState	status
	State of the constructor and of the operation result.

Detailed Description

Constructor of a shell from sheet material with a bead.

Constructor of a shell from sheet material with a bead.
Subject to the parameters a bead can be constructed of the following type: circular - with generating curve in the form of circular arc, V-shaped - with generating curve in the form of an arc with the tangent segments in each sides or U-shaped - with generating curve in the form of three segments with fillets or without them.

Member Function Documentation

◆ Duplicate()

MbCreator& MbBeadSolid::Duplicate ( MbRegDuplicate * iReg = nullptr ) const

overridevirtual

Create a copy of the object.

Create a copy of the object using the registrator. The registrator is used to prevent multiple copying of an object. If the object contains references to other objects, then the included objects are copied too. It is allowed not to pass the registrator to a function. Then the new copy of the object will be created. It is allowed not to use the registrator while copying a single object or a set of disconnected objects. The registrator must be used to copy several correlated objects successively. It is possible that the relation between objects means that the objects contain references on the common objects. Then, while copying without using the registrator, one can get a set of copies which contain references to the different copies of a single embedded object, what leads to loss of relationship between the copies.

Parameters

[in] iReg - Registrator.

Returns: The object copy.

Implements MbCreator.

◆ IsSame()

bool MbBeadSolid::IsSame	(	const MbCreator &	other,
		double	accuracy
	)		const

overridevirtual

Determine whether an object is equal?

Still considered objects of the same type, all data is the same (equal).

Parameters

[in]	other	- The object to compare.
[in]	accuracy	- The accuracy to compare.

Returns: Whether the objects are equal.

Implements MbCreator.

◆ IsSimilar()

bool MbBeadSolid::IsSimilar ( const MbCreator & item ) const

overridevirtual

Determine whether an object is similar?

Such are considered the same objects whose data are similar.

Parameters

[in] item - The object to compare.

Returns: Whether the objects are similar.

Reimplemented from MbCreator.

◆ Transform()

void MbBeadSolid::Transform	(	const MbMatrix3D &	matr,
		MbRegTransform *	iReg = `nullptr`
	)

overridevirtual

Transform according to the matrix.

Transform the initial object according to the matrix using the registrator. If the object contains references to the other geometric objects, then the nested objects are transformed according to the matrix. The registrator is used for preventing multiple transformation of the object. The function can be used without the registrator to transform a single object. The registrator must be used to transform a set of interdependent objects to prevent repeated transformation of the nested objects, since it is not ruled out that several objects from the set contain references to one or several common objects subject to transformation.

Parameters

[in]	matr	- A transformation matrix.
[in]	iReg	- Registrator.

Implements MbCreator.

◆ Move()

void MbBeadSolid::Move	(	const MbVector3D &	to,
		MbRegTransform *	iReg = `nullptr`
	)

overridevirtual

Translate along a vector.

Move a geometric object along the vector using the registrator. If the object contains references to the other objects, then the translation operation is applied to the nested objects. The registrator is used for preventing multiple transformation of the object. The function can be used without the registrator to transform a single object. The registrator must be used to transform a set of interdependent objects to prevent repeated transformation of the nested objects, since it is not ruled out that several objects from the set contain references to one or several common objects subject to moving.

Parameters

[in]	to	- Movement vector.
[in]	iReg	- Registrator.

Implements MbCreator.

◆ Rotate()

void MbBeadSolid::Rotate	(	const MbAxis3D &	axis,
		double	angle,
		MbRegTransform *	iReg = `nullptr`
	)

overridevirtual

Rotate an object about the axis.

Rotate an object about the axis by the given angle using the registrator. If the object contains references to the other geometric objects, then the rotation operation is applied to the nested objects too. The registrator is used for preventing multiple transformation of the object. The function can be used without the registrator to transform a single object. The registrator must be used to transform a set of interdependent objects to prevent repeated transformation of the nested objects, since it is not ruled out that several objects from the set contain references to one or several common objects subject to rotation.

Parameters

[in]	axis	- The rotation axis.
[in]	angle	- The rotation angle.
[in]	iReg	- Registrator.

Implements MbCreator.

◆ CreateShell()

bool MbBeadSolid::CreateShell	(	MbFaceShell *&	shell,
		MbeCopyMode	sameShell,
		RPArray< MbSpaceItem > *	items = `nullptr`
	)

overridevirtual

Create a shell from the initial data.

Construction of a new shell or modification of the given one from the source data according to the constructor.

Parameters

[in]	shell	- A shell to be modified or a new shell.
[in]	sameShell	- Whether to perform complete copying of elements while constructing.
[in]	items	- Container for the elements of not performed constructions (can be nullptr).

Returns: Whether the construction is performed.

Reimplemented from MbCreator.

The documentation for this class was generated from the following file:

cr_stamp_bead_solid.h

Public Member Functions

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ Duplicate()

◆ IsSame()

◆ IsSimilar()

◆ Transform()

◆ Move()

◆ Rotate()

◆ CreateShell()